+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6024-ZZNR · 120 × 180 × 28

Deep groove ball · 6024-ZZNR

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6024-ZZNR: ⌀120 × ⌀180 × 28 mm⌀180⌀120286024-ZZNRZZ
    Fig. 1: 6024-ZZNR, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6024-ZZNR

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6024-ZZNR

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 12 approximate
    d
    120 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    180 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    28 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 120 × 180 × 28 from other brands

    13 products
    Cross-section drawing to size: Deep groove ball, 120 × 180 × 28 mm
    You are viewingFAG 6024-ZZNR

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 60246024open, no protection, standard designCT120 × 180 × 2851 pcs€12.31
    • Series illustration (not a photo of this item): 60246024open, no protection, standard designNTE120 × 180 × 283 pcs€20.69
    • Series illustration (not a photo of this item): 60246024open, no protection, standard designDYZV120 × 180 × 28available to orderon request
    • Series illustration (not a photo of this item): 60246024open, no protection, standard designKG120 × 180 × 28available to orderon request
    • Series illustration (not a photo of this item): 60246024open, no protection, standard designSKF120 × 180 × 28available to orderon request
    • Series illustration (not a photo of this item): 6024/C36024/C3open, no protection, clearance C3, standard designSKF120 × 180 × 28available to orderon request
    • Series illustration (not a photo of this item): 6024 ZZ6024 ZZstandard designno brand120 × 180 × 28available to orderon request
    • Series illustration (not a photo of this item): 6024 ZZ6024 ZZstandard designIBB120 × 180 × 28available to orderon request
    • Series illustration (not a photo of this item): 6024 ZZ6024 ZZstandard designKG120 × 180 × 28available to orderon request
    • Series illustration (not a photo of this item): 6024 ZZ6024 ZZstandard designNTE120 × 180 × 28available to orderon request
    02

    Often bought with this

    seal 120×180

    1 product
    • Seal 120×180JULU 120-180-13 TCWhy it fits: Oil seal 120×180: shaft 120 and housing bore 180, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 180d 120B 28
    d×D×Bsize 120 × 180 × 28mm

    Deep groove ball bearing 6024-ZZ, design ZZ: metal shields on both sides. Under GOST the same bearing is designated 80124.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 80124?

    It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0124 corresponds to the ISO base 6024. Size 120 × 180 × 28 mm, a full equivalent of 6024-ZZ.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet