+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6011-M · 55 × 90 × 18

Deep groove ball · 6011 M

radial — mediumaxial — low, on both sides
    Drawing of 6011 M: ⌀55 × ⌀90 × 18 mm6011 M
    Fig. 1: 6011 M, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6011-M

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6011-M

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 26 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    18 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 55 × 90 × 18 from other brands

    27 products
    Drawing: 6011 M
    You are viewingFAG 6011-M

    Same size, different design: the difference is written in the row.

    • Photo: 6011 2RS6011 2RScontact seals on both sides, standard designCT55 × 90 × 18869 pcs€2.27
    • Series illustration (not a photo of this item): 6011 2RS6011 2RScontact seals on both sides, standard designNTE55 × 90 × 1828 pcs€3.48
    • Series illustration (not a photo of this item): 6011 2RS6011 2RScontact seals on both sides, standard designKoyo55 × 90 × 1810 pcs€13.89
    • Photo: 6011 2RS6011 2RScontact seals on both sides, standard designF&D55 × 90 × 18available to order€5.55
    • Photo: 6011 2RS6011 2RScontact seals on both sides, standard designZ&S55 × 90 × 18available to order€6.13
    • Photo: 6011 2RS16011 2RS1contact seals on both sides, standard designSKF55 × 90 × 18available to order€16.55
    • Series illustration (not a photo of this item): 6011-2RS1/C36011-2RS1/C3contact seals on both sides, clearance C3, standard designSKF55 × 90 × 18available to order€16.69
    • Photo: 6011 2RS6011 2RScontact seals on both sides, standard designFAG55 × 90 × 18available to order€28.68
    • Series illustration (not a photo of this item): 6011 2RS6011 2RScontact seals on both sides, standard designDSK55 × 90 × 18available to orderon request
    • Series illustration (not a photo of this item): 6011 2RS6011 2RScontact seals on both sides, standard designKG55 × 90 × 18available to orderon request
    02

    Often bought with this

    seal 55×90, shaft snap ring Ø55, bore snap ring Ø90

    5 products
    • Seal 55×90JULU 055-90-10 TCWhy it fits: Oil seal 55×90: shaft 55 and housing bore 90, the same as the bearing
      €0.71455 pcs
    • Seal 55×90JULU 055-90-8 TCWhy it fits: Oil seal 55×90: shaft 55 and housing bore 90, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 1 pcs per machine

      ours has M

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (111) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 90d 55B 18
    d×D×Bsize 55 × 90 × 18mm

    Deep groove ball bearing 6011. Under GOST the same bearing is designated 111.

    Frequently asked questions

    What is 111?

    It is the same bearing under GOST 3189-89: 111 corresponds to the ISO base 6011. Size 55 × 90 × 18 mm, a full equivalent of 6011.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet