+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6008-C3 · 40 × 68 × 15

Deep groove ball · 6008 C3

radial — mediumaxial — low, on both sides
    Drawing of 6008 C3: ⌀40 × ⌀68 × 15 mm6008 C3
    Fig. 1: 6008 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6008-C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 6008-C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 49 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    68 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    15 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    C3
    C
    17.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    11.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.19 kg
    MassWeight of the product. Source: two supplier sources
    01

    Equivalents

    the same size 40 × 68 × 15 from other brands

    51 products
    Photo: 6008 C3
    You are viewingFAG 6008-C3

    Everything the number specifies matches: series 60, 40 × 68 × 15 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Photo: 6008 C36008 C3This bearingFAG40 × 68 × 15out of stockon requestyou are here
    • Photo: 6008 C36008 C3Z&S40 × 68 × 15available to order€2.82
    02

    Often bought with this

    seal 40×68, shaft snap ring Ø40, bore snap ring Ø68

    5 products
    • Seal 40×68JULU 040-68-10 TCWhy it fits: Oil seal 40×68: shaft 40 and housing bore 68, the same as the bearing
      €0.443,418 pcs
    • Seal 40×68JULU 040-68-7 TCWhy it fits: Oil seal 40×68: shaft 40 and housing bore 68, the same as the bearing
      €0.44210 pcs
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø68CT SEG 68 W by 100Why it fits: DIN 472 snap ring for a 68 bore: holds the outer ring in the housing
      €16.07available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 68d 40B 15
    d×D×Bsize 40 × 68 × 15mm
    Cdynamic 17.8kN
    C0static 11.5kN
    mweight 0.19kg

    Deep groove ball bearing 6008 C3.

    C, C₀, m: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet