+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
32318-A · 90 × 190 × 67.5

Tapered roller · 32318-A

at an angle — high, on one side
    Drawing of 32318-A: ⌀90 × ⌀190 × 67.5 mm⌀190⌀90B 64T 67.5C 53α32318-A
    Fig. 1: 32318-A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32318-A

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing FAG 32318-A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 5 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    190 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    64 mm
    Width BRing width. Source: supplier data
    T
    67.5 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    53 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 90 × 190 × 67.5 from other brands

    10 products
    Series illustration (not a photo of this item): 32318-A
    You are viewingFAG 32318-A

    Everything the number specifies matches: series 323, 90 × 190 × 64 mm, special design. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 32318-A32318-AThis bearingFAG90 × 190 × 64available to orderon requestyou are here
    • Series illustration (not a photo of this item): 32318 A32318 Ano brand90 × 190 × 64available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 90 × 190 × 67.5mm

    Tapered roller bearing 32318. Under GOST the same bearing is designated 7618.

    Frequently asked questions

    What is 7618?

    It is the same bearing under GOST 3189-89: 7618 corresponds to the ISO base 32318. Size 90 × 190 × 67.5 mm, a full equivalent of 32318.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet