+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
32314-A · 70 × 150 × 54

Tapered roller · 32314-A

at an angle — high, on one side
    Drawing of 32314-A: ⌀70 × ⌀150 × 54 mm⌀150⌀70B 51T 54C 42α32314-A
    Fig. 1: 32314-A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32314-A

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing FAG 32314-A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 4 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    51 mm
    Width BRing width. Source: supplier data
    T
    54 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    42 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 70 × 150 × 54 from other brands

    7 products
    Series illustration (not a photo of this item): 32314-A
    You are viewingFAG 32314-A

    Everything the number specifies matches: series 323, 70 × 150 × 51 mm, special design. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 32314-A32314-AThis bearingFAG70 × 150 × 51available to orderon requestyou are here
    • Photo: 32314 A32314 AZ&S70 × 150 × 51available to order€30.99
    02

    Often bought with this

    shaft snap ring Ø70, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    6 machines1 makeby parts catalogues

    1. KhTZ-16131, KhTZ-16331 KhTZ check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has A; GOST → ISO pair 7614→32314 only CX is not checked against a second source

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    2. KhTZ-17021, KhTZ-17221 KhTZ check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has A; GOST → ISO pair 7614→32314 only CX is not checked against a second source

      manufacturer’s catalogue: Tractors KhTZ-17021 and KhTZ-17221. Operator’s manual 170.00.000 RE

    3. KhTZ-242K.20 KhTZ check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has A; GOST → ISO pair 7614→32314 only CX is not checked against a second source

      manufacturer’s catalogue: Tractor KhTZ-242K.20. Operator’s manual

    4. KhTZ-243K.20 KhTZ check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has A; GOST → ISO pair 7614→32314 only CX is not checked against a second source

      manufacturer’s catalogue: Tractor KhTZ-243K.20. Operator’s manual

    5. T-150K (KhTZ-150K-09-25) KhTZ check the version 1 assembly · 1 pcs per machine

      the machine has A; ours does not; ours has A; GOST → ISO pair 7614→32314 only CX is not checked against a second source

      manufacturer’s catalogue: Tractor KhTZ-150K-09-25. Operator’s manual 151.00.000-09-25 RE

    Number in the manufacturer’s catalogue: by GOST (7614) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 70 × 150 × 54mm

    Tapered roller bearing 32314. Under GOST the same bearing is designated 7614.

    Frequently asked questions

    What is 7614?

    It is the same bearing under GOST 3189-89: 7614 corresponds to the ISO base 32314. Size 70 × 150 × 54 mm, a full equivalent of 32314.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet