+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
32305-A · 25 × 62 × 25.25

Tapered roller · 32305 A

at an angle — high, on one side
    Drawing of 32305 A: ⌀25 × ⌀62 × 25.25 mm⌀62⌀25B 24T 25.25C 20α32305 A
    Fig. 1: 32305 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32305-A

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing FAG 32305-A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 5 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    24 mm
    Width BRing width. Source: supplier data
    T
    25.25 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    20 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    m
    0.36 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 62 × 25.25 from other brands

    9 products
    Photo: 32305 A
    You are viewingFAG 32305-A

    Everything the number specifies matches: series 323, 25 × 62 × 24 mm, special design. The codes in the number are read against the FAG catalogue.

    • Photo: 32305 A32305 AThis bearingFAG25 × 62 × 24out of stockon requestyou are here
    • Photo: 32305 A32305 AZ&S25 × 62 × 24available to order€5.55
    02

    Often bought with this

    seal 25×62, shaft snap ring Ø25, bore snap ring Ø62

    5 products
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39890 pcs
    • Seal 25×62JULU 025-62-7 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39available to order
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 25 × 62 × 25.25mm
    mweight 0.36kg

    Tapered roller bearing 32305. Under GOST the same bearing is designated 7605.

    M: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7605?

    It is the same bearing under GOST 3189-89: 7605 corresponds to the ISO base 32305. Size 25 × 62 × 25.25 mm, a full equivalent of 32305.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet