+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
32222-XL · 110 × 200 × 56

Tapered roller · 32222 XL

at an angle — high, on one side
    Drawing of 32222 XL: ⌀110 × ⌀200 × 56 mm⌀200⌀110B 53T 56C 46α32222 XL
    Fig. 1: 32222 XL, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32222-XL

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing FAG 32222-XL

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 10 approximate
    d
    110 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    200 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    53 mm
    Width BRing width. Source: supplier data
    T
    56 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    46 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 110 × 200 × 56 from other brands

    14 products
    Series illustration (not a photo of this item): 32222 XL
    You are viewingFAG 32222-XL

    Same size, different design: the difference is written in the row.

    • Photo: 3222232222standard designSKF110 × 200 × 534 pcs€243.74
    • Series illustration (not a photo of this item): 3222232222standard designCT110 × 200 × 53available to order€24.09
    • Photo: 32222 A32222 AAZ&S110 × 200 × 53available to order€74.11
    • Series illustration (not a photo of this item): 3222232222standard designDYZV110 × 200 × 53available to orderon request
    • Series illustration (not a photo of this item): 3222232222standard designFAG110 × 200 × 53available to orderon request
    • Cross-section drawing to size: Tapered roller, 110 × 200 × T 56 mm32222-A-N11CA-A230-280A, C, groove for a snap ring, 11, A230, 280: not decodedFAG110 × 200 × 53available to orderon request
    • Series illustration (not a photo of this item): 3222232222standard designKG110 × 200 × 53available to orderon request
    • Series illustration (not a photo of this item): 3222232222standard designNTE110 × 200 × 53available to orderon request
    • Type diagram, no dimensions: bearing7522AASPZ-GROUP110 × 200 × ?available to orderon request
    • Series illustration (not a photo of this item): 3222232222standard designTIMKEN110 × 200 × 53available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has XL; GOST → ISO pair 7522→32222 only CX is not checked against a second source

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (7522) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 110 × 200 × 56mm

    Tapered roller bearing 32222. Under GOST the same bearing is designated 7522.

    Frequently asked questions

    What is 7522?

    It is the same bearing under GOST 3189-89: 7522 corresponds to the ISO base 32222. Size 110 × 200 × 56 mm, a full equivalent of 32222.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet