+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
30304-A · 20 × 52 × 16.25

Tapered roller · 30304 A

at an angle — high, on one side
    Drawing of 30304 A: ⌀20 × ⌀52 × 16.25 mm⌀52⌀20B 16T 16.25C 13α30304 A
    Fig. 1: 30304 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 30304-A

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing FAG 30304-A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 6 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    T
    16.25 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    13 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 20 × 52 × 16.25 from other brands

    11 products
    Series illustration (not a photo of this item): 30304 A
    You are viewingFAG 30304-A

    Everything the number specifies matches: series 303, 20 × 52 × 16 mm, special design. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 30304 A30304 AThis bearingFAG20 × 52 × 16available to orderon requestyou are here
    • Photo: 30304 A30304 AKLT20 × 52 × ?available to order€1.31
    • Photo: 30304 A30304 AZ&S20 × 52 × ?available to order€2.50
    02

    Often bought with this

    seal 20×52, shaft snap ring Ø20, bore snap ring Ø52

    6 products
    • Seal 20×52JULU 020-52-10 TCWhy it fits: Oil seal 20×52: shaft 20 and housing bore 52, the same as the bearing
      €0.392,570 pcs
    • Seal 20×52JULU 020-52-7 TCWhy it fits: Oil seal 20×52: shaft 20 and housing bore 52, the same as the bearing
      €0.391,300 pcs
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Maschio/​Gaspardo DC Rapido (harrow drill) Maschio Gaspardo same geometry 1 assembly

      ours has A

      manufacturer’s catalogue: maschio_dc---dc-rapido

    Number in the manufacturer’s catalogue: by GOST (7304) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Tsize 20 × 52 × 16.25mm

    Tapered roller bearing 30304. Under GOST the same bearing is designated 7304.

    Frequently asked questions

    What is 7304?

    It is the same bearing under GOST 3189-89: 7304 corresponds to the ISO base 30304. Size 20 × 52 × 16.25 mm, a full equivalent of 30304.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet