+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16011 · 55 × 90 × 11

Deep groove ball · 16011

radial — mediumaxial — low, on both sides
    Drawing of 16011: ⌀55 × ⌀90 × 11 mm16011
    Fig. 1: 16011, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16011

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing FAG 16011

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 1 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    11 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.226 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 55 × 90 × 11 from other brands

    6 products
    Photo: 16011
    You are viewingFAG 16011

    Everything the number specifies matches: series 160, 55 × 90 × 11 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

    • Photo: 1601116011This bearingFAG55 × 90 × 11out of stockon requestyou are here
    • Series illustration (not a photo of this item): 1601116011CT55 × 90 × 1115 pcs€2.13
    • Photo: 1601116011GPZ55 × 90 × 11available to order€7.15
    • Series illustration (not a photo of this item): 1601116011HIC55 × 90 × 11out of stockon request
    • Series illustration (not a photo of this item): 1601116011SKF55 × 90 × 11available to orderon request
    02

    Often bought with this

    seal 55×90, shaft snap ring Ø55, bore snap ring Ø90

    5 products
    • Seal 55×90JULU 055-90-10 TCWhy it fits: Oil seal 55×90: shaft 55 and housing bore 90, the same as the bearing
      €0.71455 pcs
    • Seal 55×90JULU 055-90-8 TCWhy it fits: Oil seal 55×90: shaft 55 and housing bore 90, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 90d 55B 11
    d×D×Bsize 55 × 90 × 11mm
    mweight 0.226kg

    Deep groove ball bearing 16011. Under GOST the same bearing is designated 7000111.

    M: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7000111?

    It is the same bearing under GOST 3189-89: 7000111 corresponds to the ISO base 16011. Size 55 × 90 × 11 mm, a full equivalent of 16011.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet