+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1208-K-TV-C3 · 40 × 80 × 18

Self-aligning ball · 1208 KTV C3

radial — mediumaxial — low, on both sides
    Drawing of 1208 KTV C3: ⌀40 × ⌀80 × 18 mm⌀80⌀40181208 KTV C3
    Fig. 1: 1208 KTV C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1208-K-TV-C3

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing FAG 1208-K-TV-C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 23 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    18 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    C3
    m
    0.42 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 80 × 18 from other brands

    25 products
    Series illustration (not a photo of this item): 1208 KTV C3
    You are viewingFAG 1208-K-TV-C3

    Everything the number specifies matches: series 12, 40 × 80 × 18 mm, open, no protection, K, clearance C3, special design. The codes in the number are read against the FAG catalogue.

    • Series illustration (not a photo of this item): 1208 KTV C31208 KTV C3This bearingFAG40 × 80 × 18out of stockon requestyou are here
    • Series illustration (not a photo of this item): 1208 KC31208 KC3NACHI40 × 80 × 18available to orderon request
    02

    Often bought with this

    adapter sleeve H208, lock nut M40×1.5, lock washer MB08, bore snap ring Ø80, seal 35×80

    8 products
    • Adapter sleeve H208CT H 208 with black KMWhy it fits: H208 for 1208 K: 1:12 taper, bore 40 for shaft 35 (Koyo, p. 65)
      €1.19100 pcs
    • Adapter sleeve H208Z&S H 208Why it fits: H208 for 1208 K: 1:12 taper, bore 40 for shaft 35 (Koyo, p. 65)
      €2.57available to order
    • Lock nut M40×1.5CT KM 08Why it fits: KM08 is the nut for sleeve H208: thread M40×1.5
      €0.86available to order
    • Lock nut M40×1.5Z&S KM 8Why it fits: KM08 is the nut for sleeve H208: thread M40×1.5
      €1.23available to order
    • Lock washer MB08CT MB 08Why it fits: MB08 locks the KM08 nut (ISO 2982-2)
      €0.173,038 pcs
    • Lock washer MB08MTM MB08Why it fits: MB08 locks the KM08 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: sleeve shaft 35, housing bore for the bearing 80; SN/SNL housings have their own seals, so check against the housing
      €0.53250 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 40 × 80 × 18mm
    mweight 0.42kg

    Self-aligning ball bearing 1208 K C3.

    M: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet