+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
DYZV
6236 · 180 × 320 × 52

Deep groove ball · 6236

radial — mediumaxial — low, on both sides
    Drawing of 6236: ⌀180 × ⌀320 × 52 mm6236
    Fig. 1: 6236, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6236

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing DYZV 6236

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    3 exact, 1 approximate
    d
    180 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    320 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    52 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 180 × 320 × 52 from other brands

    6 products
    Series illustration (not a photo of this item): 6236
    You are viewingDYZV 6236

    Everything the number specifies matches: series 62, 180 × 320 × 52 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the DYZV catalogue.

    • Series illustration (not a photo of this item): 62366236This bearingDYZV180 × 320 × 52available to orderon requestyou are here
    • Series illustration (not a photo of this item): 62366236KG180 × 320 × 52available to orderon request
    • Series illustration (not a photo of this item): 62366236ZVL180 × 320 × 52available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 320d 180B 52
    d×D×Bsize 180 × 320 × 52mm

    Deep groove ball bearing 6236. Under GOST the same bearing is designated 236.

    Frequently asked questions

    What is 236?

    It is the same bearing under GOST 3189-89: 236 corresponds to the ISO base 6236. Size 180 × 320 × 52 mm, a full equivalent of 6236.

    Will 6236 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet