+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
DYZV
6214/C3 · 70 × 125 × 24

Deep groove ball · 6214/C3

radial — mediumaxial — low, on both sides
    Drawing of 6214/C3: ⌀70 × ⌀125 × 24 mm6214/C3
    Fig. 1: 6214/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6214/C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing DYZV 6214/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 26 approximate
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    24 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 70 × 125 × 24 from other brands

    28 products
    Series illustration (not a photo of this item): 6214/C3
    You are viewingDYZV 6214/C3

    Everything the number specifies matches: series 62, 70 × 125 × 24 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the DYZV catalogue.

    • Series illustration (not a photo of this item): 6214/C36214/C3This bearingDYZV70 × 125 × 24available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6214/C36214/C3SKF70 × 125 × 24available to orderon request
    02

    Often bought with this

    seal 70×125, shaft snap ring Ø70, bore snap ring Ø125

    3 products
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing
      €0.8782 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines2 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ same geometry 2 assemblies · 3 pcs per machine

      ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus check the version 1 assembly · 1 pcs per machine

      ours has clearance C3; the machine takes normal (CN); not set by the number: sealing

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 125d 70B 24
    d×D×Bsize 70 × 125 × 24mm

    Deep groove ball bearing 6214 C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet