+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
DYZV
30317 · 85 × 180 × 44.5

Tapered roller · 30317

at an angle — high, on one side
    Drawing of 30317: ⌀85 × ⌀180 × 44.5 mm⌀180⌀85B 41T 44.5C 34α30317
    Fig. 1: 30317, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 30317

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing DYZV 30317

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    3 exact, 1 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    180 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    41 mm
    Width BRing width. Source: supplier data
    T
    44.5 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    34 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Equivalents

    the same size 85 × 180 × 44.5 from other brands

    4 products
    Series illustration (not a photo of this item): 30317
    You are viewingDYZV 30317

    Everything the number specifies matches: series 303, 85 × 180 × 41 mm, ordinary steel, design without special letters. The codes in the number are read against the DYZV catalogue.

    • Series illustration (not a photo of this item): 3031730317This bearingDYZV85 × 180 × 41available to orderon requestyou are here
    • Series illustration (not a photo of this item): 3031730317CT85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): 3031730317KG85 × 180 × 41available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 85 × 180 × 44.5mm

    Tapered roller bearing 30317. Under GOST the same bearing is designated 7317.

    Frequently asked questions

    What is 7317?

    It is the same bearing under GOST 3189-89: 7317 corresponds to the ISO base 30317. Size 85 × 180 × 44.5 mm, a full equivalent of 30317.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet