+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
DYZV
22230MBW33 · 150 × 270 × 73

Spherical roller · 22230MBW33

radial — highaxial — medium, on both sides
    Drawing of 22230MBW33: ⌀150 × ⌀270 × 73 mm⌀270⌀1507322230MBW33
    Fig. 1: 22230MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22230MBW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing DYZV 22230MBW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 14 approximate
    d
    150 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    270 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    73 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 150 × 270 × 73 from other brands

    18 products
    Series illustration (not a photo of this item): 22230MBW33
    You are viewingDYZV 22230MBW33

    Everything the number specifies matches: series 222, 150 × 270 × 73 mm, open, no protection, normal clearance, special design. The codes in the number are read against the DYZV catalogue.

    • Series illustration (not a photo of this item): 22230MBW3322230MBW33This bearingDYZV150 × 270 × 73available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22230 MBW3322230 MBW33NTE150 × 270 × 73available to order€179.65
    • Series illustration (not a photo of this item): 22230 MBW3322230 MBW33KG150 × 270 × 73available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 150 × 270 × 73mm

    Spherical roller bearing 22230. Under GOST the same bearing is designated 3530.

    Frequently asked questions

    What is 3530?

    It is the same bearing under GOST 3189-89: 3530 corresponds to the ISO base 22230. Size 150 × 270 × 73 mm, a full equivalent of 22230.

    Will 22230 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet