+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 205 · 25 × 52 × 15

Cylindrical roller · NU 205

radial — high
    Drawing of NU 205: ⌀25 × ⌀52 × 15 mm⌀52⌀2515NU 205
    Fig. 1: NU 205, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 205

    Load: radial high; no axial loadCylindrical roller NU

    Bearing DKF NU 205

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    11 exact, 25 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    15 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.137 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 52 × 15 from other brands

    37 products
    Series illustration (not a photo of this item): NU 205
    You are viewingDKF NU 205

    Size and design match across the brand catalogues. The codes in the number are read against the DKF catalogue.

    • Series illustration (not a photo of this item): NU 205NU 205This bearingDKF25 × 52 × 15out of stockon requestyou are here
    • Series illustration (not a photo of this item): NU 205NU 205CT25 × 52 × 155 pcs€2.13
    • Photo: NU 205 ENU 205 EZ&S25 × 52 × 15available to order€6.75
    • Photo: NU 205NU 205URB25 × 52 × 15available to order€9.95
    • Photo: NU 205 ECPNU 205 ECPSKF25 × 52 × 15available to order€23.92
    • Photo: NU 205NU 205FAG25 × 52 × 15available to order€31.71
    • Series illustration (not a photo of this item): NU 205NU 205FKL25 × 52 × 15out of stockon request
    • Series illustration (not a photo of this item): NU 205 ECJNU 205 ECJISB25 × 52 × 15available to orderon request
    • Series illustration (not a photo of this item): NU 205 EWNU 205 EWNSK25 × 52 × 15available to orderon request
    • Series illustration (not a photo of this item): NU205ET *5NU205ET *5NSK25 × 52 × 15available to orderon request
    02

    Often bought with this

    seal 25×52, shaft snap ring Ø25, bore snap ring Ø52

    6 products
    • Seal 25×52JULU 025-52-10 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing
      €0.392,950 pcs
    • Seal 25×52JULU 025-52-7 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing
      €0.397,720 pcs
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 25 × 52 × 15mm
    mweight 0.137kg

    Cylindrical roller NU bearing NU 205.

    M: DKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 205 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet