+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
32210 A · 50 × 90 × 24.75

Tapered roller · 32210 A

at an angle — high, on one side
    Drawing of 32210 A: ⌀50 × ⌀90 × 24.75 mm⌀90⌀50B 23T 24.75C 19α32210 A
    Fig. 1: 32210 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 32210 A

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing CX 32210 A

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    OEM number
    50 KB 22, 555.01.840
    Equivalents
    4 exact, 6 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    23 mm
    Width BRing width. Source: supplier data
    T
    24.75 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: two supplier sources
    Cup width C
    19 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    m
    0.61 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 90 × 24.75 from other brands

    13 products
    Photo: 32210 A
    You are viewingCX 32210 A

    Everything the number specifies matches: series 322, 50 × 90 × 23 mm, special design. The codes in the number are read against the CX catalogue.

    • Photo: 32210 A32210 AThis bearingCX50 × 90 × 23out of stockon requestyou are here
    • Photo: 32210 A32210 AKLT50 × 90 × 23available to order€3.12
    • Photo: 32210 A32210 AZ&S50 × 90 × 23available to order€5.55
    • Series illustration (not a photo of this item): 32210 A32210 AFAG50 × 90 × 23available to orderon request
    02

    Often bought with this

    seal 50×90, shaft snap ring Ø50, bore snap ring Ø90

    5 products
    • Seal 50×90JULU 050-90-10 TCWhy it fits: Oil seal 50×90: shaft 50 and housing bore 90, the same as the bearing
      €0.73280 pcs
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 50 × 90 × 24.75mm
    mweight 0.61kg

    Tapered roller bearing 32210. Under GOST the same bearing is designated 7510.

    M: CX data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7510?

    It is the same bearing under GOST 3189-89: 7510 corresponds to the ISO base 32210. Size 50 × 90 × 24.75 mm, a full equivalent of 32210.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet