+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €4.71 per piece.
UC 308 · 40 × 90 × 52

Insert with set screws UC · UC 308

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of UC 308: ⌀40 × ⌀90 × 52 mm⌀90⌀4052UC 308
    Fig. 1: UC 308, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of UC 308

    Load: radial medium; axial low, on both sidesInsert with set screws UC

    Insert bearing CT UC 308

    €5.70per piece incl. VAT
    In stock: 48 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    6 exact, 0 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    52 mm
    Width BRing width. Source: two supplier sources
    Outer ring width C
    27 mm
    Outer ring width CWidth of the outer ring. Source: supplier data
    Seal
    seal + flinger
    C
    40.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    40.7 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 40 × 90 × 52 from other brands

    6 products
    Series illustration (not a photo of this item): UC 308
    You are viewingCT UC 308
    €5.70baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): UC 308UC 308This bearingCT40 × 90 × 5248 pcs€5.70you are here
    • Series illustration (not a photo of this item): UC308UC308NTE40 × 90 × 528 pcs€8.02+€2.32
    • Photo: UC 308UC 308F&D40 × 90 × 52out of stock€17.45+€11.75
    • Series illustration (not a photo of this item): UC 308UC 308SKF40 × 90 × 52available to orderon request
    • Series illustration (not a photo of this item): UC 308UC 308no brand40 × 90 × 52available to orderon request
    • Photo: UC 308 3LUC 308 3LZ&S40 × 90 × 52out of stockon request

    Under the price: the difference from the price of this bearing (€5.70).
    02

    Often bought with this

    complete unit UC 308

    2 products
    • Complete unit UC 308CT UCP 308Why it fits: housed unit with the same UC 308 insert: the housing together with the bearing
      €11.8373 pcs
    • Complete unit UC 308CT UCF 308Why it fits: housed unit with the same UC 308 insert: the housing together with the bearing
      €13.541,042 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Horsch Tiger 6 AS (from 2011) Horsch check the version 1 assembly · 4 pcs per machine

      not decoded: mark “A0 2X3 SNR” in the machine catalogue, mark “G2/N” in the machine catalogue; housing of the unit “FE” is not determined

      manufacturer’s catalogue: HORSCH Spare Parts Catalog (Quanos SIS.one), content language ru

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 40 × 90 × 52mm
    Cdynamic 40.7kN
    C0static 40.7kN

    Insert with set screws UC bearing UC 308.

    C, C₀: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet