+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.64 per piece.
SS 6204 ZZ · 20 × 47 × 14

Deep groove ball · SS 6204 ZZ

radial — mediumaxial — low, on both sides
    Drawing of SS 6204 ZZ: ⌀20 × ⌀47 × 14 mmSS 6204 ZZZZ
    Fig. 1: SS 6204 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of SS 6204 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT SS 6204 ZZ

    €1.98per piece incl. VAT
    In stock: 141 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 110 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    14 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 20 × 47 × 14 from other brands

    117 products
    Drawing: SS 6204 ZZ
    You are viewingCT SS 6204 ZZ
    €1.98baseline for the price comparison

    Everything the number specifies matches: series 62, 20 × 47 × 14 mm, metal shields on both sides, normal clearance, stainless steel. The codes in the number are read against the CT catalogue.

    • Drawing: SS 6204 ZZSS 6204 ZZThis bearingCT20 × 47 × 14141 pcs€1.98you are here
    • Drawing: SS 6204 ZZSS 6204 ZZIBB20 × 47 × 14available to orderon request
    • Drawing: W 6204 2ZW 6204 2ZSKF20 × 47 × 14available to orderon request

    Under the price: the difference from the price of this bearing (€1.98).
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø47, seal 20×47

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 20×47JULU 020-47-10 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.29700 pcs
    • Seal 20×47JULU 020-47-7 TCWhy it fits: Oil seal 20×47: shaft 20 and housing bore 47, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.293,920 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 47d 20B 14
    d×D×Bsize 20 × 47 × 14mm

    Deep groove ball bearing 6204-ZZ SS, design ZZ: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet