+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €7.01 per piece.
NUP 2212 · 60 × 110 × 28

Cylindrical roller · NUP 2212

radial — highaxial — low, on both sides
    Drawing of NUP 2212: ⌀60 × ⌀110 × 28 mm⌀110⌀6028NUP 2212
    Fig. 1: NUP 2212, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NUP 2212

    Load: radial high; axial low, on both sidesCylindrical roller NUP

    Bearing CT NUP 2212

    €8.48per piece incl. VAT
    In stock: 7 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    3 exact, 12 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    28 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    146 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    153 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.15 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 110 × 28 from other brands

    15 products
    Series illustration (not a photo of this item): NUP 2212
    You are viewingCT NUP 2212
    €8.48baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NUP 2212NUP 2212This bearingCT60 × 110 × 287 pcs€8.48you are here
    • Photo: NUP 2212NUP 2212DKF60 × 110 × 28available to order€46.25+€37.77
    • Series illustration (not a photo of this item): NUP 2212 E.TVP2NUP 2212 E.TVP2FAG60 × 110 × 28available to orderon request

    Under the price: the difference from the price of this bearing (€8.48).
    02

    Often bought with this

    seal 60×110, shaft snap ring Ø60, bore snap ring Ø110

    4 products
    • Seal 60×110JULU 060-110-12 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      €1.05480 pcs
    • Seal 60×110JULU 060-110-10 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 110 × 28mm
    Cdynamic 146kN
    C0static 153kN
    mweight 1.15kg

    Cylindrical roller NUP bearing NUP 2212.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2212 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet