+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NU 2324 · 120 × 260 × 86

Cylindrical roller · NU 2324

radial — high
    Drawing of NU 2324: ⌀120 × ⌀260 × 86 mm⌀260⌀12086NU 2324
    Fig. 1: NU 2324, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 2324

    Load: radial high; no axial loadCylindrical roller NU

    Bearing CT NU 2324

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    4 exact, 2 approximate
    d
    120 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    260 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    86 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 120 × 260 × 86 from other brands

    6 products
    Series illustration (not a photo of this item): NU 2324
    You are viewingCT NU 2324

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NU 2324NU 2324This bearingCT120 × 260 × 86available to orderon requestyou are here
    • Series illustration (not a photo of this item): NU2324MNU2324MCT120 × 260 × 86available to orderon request
    • Series illustration (not a photo of this item): NU2324MNU2324MNTE120 × 260 × 86available to orderon request
    • Series illustration (not a photo of this item): NU 2324 MNU 2324 MURB120 × 260 × 86available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 120 × 260 × 86mm

    Cylindrical roller NU bearing NU 2324.

    Frequently asked questions

    Will 2324 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet