+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ2326M · 130 × 280 × 93

Cylindrical roller · NJ2326M

radial — highaxial — low, on one side
    Drawing of NJ2326M: ⌀130 × ⌀280 × 93 mm⌀280⌀13093NJ2326M
    Fig. 1: NJ2326M, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ2326M

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ2326M

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 3 approximate
    d
    130 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    280 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    93 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 130 × 280 × 93 from other brands

    4 products
    Series illustration (not a photo of this item): NJ2326M
    You are viewingCT NJ2326M

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): N2326 MN2326 Mdifferent designCT130 × 280 × 93available to orderon request
    • Series illustration (not a photo of this item): NU 2326 ECML/C4NU 2326 ECML/C4clearance C4, reinforced design EC, MLSKF130 × 280 × 93available to orderon request
    • Series illustration (not a photo of this item): SL 192326 C3SL 192326 C3clearance C3, SL: not decodedNEU130 × 280 × 93available to order€638.76
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 130 × 280 × 93mm

    Cylindrical roller NJ bearing NJ2326M.

    Frequently asked questions

    Will 2326 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet