+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ228 · 140 × 250 × 42

Cylindrical roller · NJ228

radial — highaxial — low, on one side
    Drawing of NJ228: ⌀140 × ⌀250 × 42 mm⌀250⌀14042NJ228
    Fig. 1: NJ228, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ228

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ228

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 13 approximate
    d
    140 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    250 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    42 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 140 × 250 × 42 from other brands

    15 products
    Series illustration (not a photo of this item): NJ228
    You are viewingCT NJ228

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NJ228NJ228This bearingCT140 × 250 × 42available to orderon requestyou are here
    • Series illustration (not a photo of this item): NJ 228 ENJ 228 EZVL140 × 250 × 42available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 140 × 250 × 42mm

    Cylindrical roller NJ bearing NJ228.

    Frequently asked questions

    Will 228 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet