+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €20.87 per piece.
NJ224 · 120 × 215 × 40

Cylindrical roller · NJ224

radial — highaxial — low, on one side
    Drawing of NJ224: ⌀120 × ⌀215 × 40 mm⌀215⌀12040NJ224
    Fig. 1: NJ224, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ224

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ224

    €25.25per piece incl. VAT
    In stock: 10 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    6 exact, 8 approximate
    d
    120 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    215 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    40 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 120 × 215 × 40 from other brands

    14 products
    Series illustration (not a photo of this item): NJ224
    You are viewingCT NJ224
    €25.25baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NJ224NJ224This bearingCT120 × 215 × 4010 pcs€25.25you are here
    • Series illustration (not a photo of this item): NJ224EMNJ224EMDYZV120 × 215 × 40available to orderon request
    • Series illustration (not a photo of this item): NJ 224 WNJ 224 WNSK120 × 215 × 40available to orderon request
    • Series illustration (not a photo of this item): NJ 224 ECJNJ 224 ECJSKF120 × 215 × 40available to orderon request
    • Series illustration (not a photo of this item): NJ224 EMNJ224 EMURB120 × 215 × 40available to orderon request
    • Series illustration (not a photo of this item): NJ 224 ENJ 224 EZVL120 × 215 × 40available to orderon request

    Under the price: the difference from the price of this bearing (€25.25).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 120 × 215 × 40mm

    Cylindrical roller NJ bearing NJ224.

    Frequently asked questions

    Will 224 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet