+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.84 per piece.
NJ 307 · 35 × 80 × 21

Cylindrical roller · NJ 307

radial — highaxial — low, on one side
    Drawing of NJ 307: ⌀35 × ⌀80 × 21 mm⌀80⌀3521NJ 307
    Fig. 1: NJ 307, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 307

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ 307

    €3.44per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    10 exact, 35 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    80 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    21 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    75 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    63 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 35 × 80 × 21 from other brands

    47 products
    Series illustration (not a photo of this item): NJ 307
    You are viewingCT NJ 307
    €3.44baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NJ 307NJ 307This bearingCT35 × 80 × 21available to order€3.44you are here
    • Series illustration (not a photo of this item): NJ 307 ENJ 307 ECT35 × 80 × 2165 pcs€4.16+€0.72
    • Photo: NJ 307NJ 307KG35 × 80 × 21available to order€8.63+€5.19
    • Photo: NJ 307 ENJ 307 EZ&S35 × 80 × 21available to order€13.64+€10.20
    • Series illustration (not a photo of this item): NJ 307NJ 307no brand35 × 80 × 21available to orderon request
    • Series illustration (not a photo of this item): NJ307ET *5NJ307ET *5NSK35 × 80 × 21available to orderon request
    • Series illustration (not a photo of this item): NJ 307 ENJ 307 ENTE35 × 80 × 21available to orderon request
    • Series illustration (not a photo of this item): NJ 307 ECJNJ 307 ECJSKF35 × 80 × 21available to orderon request
    • Series illustration (not a photo of this item): NJ 307 ECPNJ 307 ECPSKF35 × 80 × 21available to orderon request
    • Series illustration (not a photo of this item): NJ 307 ECPNJ 307 ECPSTEYR35 × 80 × 21out of stockon request

    Under the price: the difference from the price of this bearing (€3.44).
    02

    Often bought with this

    seal 35×80, shaft snap ring Ø35, bore snap ring Ø80

    6 products
    • Seal 35×80JULU 035-80-10 TCWhy it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      €0.53250 pcs
    • Seal 35×80035-80-10Why it fits: Oil seal 35×80: shaft 35 and housing bore 80, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø80CT SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      €21.42out of stock
    • Bore snap ring Ø80SEG 80 W by 100Why it fits: DIN 472 snap ring for a 80 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 80 × 21mm
    Cdynamic 75kN
    C0static 63kN

    Cylindrical roller NJ bearing NJ 307.

    C, C₀: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 307 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet