+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.07 per piece.
NJ 305 · 25 × 62 × 17

Cylindrical roller · NJ 305

radial — highaxial — low, on one side
    Drawing of NJ 305: ⌀25 × ⌀62 × 17 mm⌀62⌀2517NJ 305
    Fig. 1: NJ 305, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 305

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ 305

    €2.50per piece incl. VAT
    In stock: 4 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    8 exact, 10 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    17 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    46.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    36.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.29 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 62 × 17 from other brands

    20 products
    Series illustration (not a photo of this item): NJ 305
    You are viewingCT NJ 305
    €2.50baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NJ 305NJ 305This bearingCT25 × 62 × 174 pcs€2.50you are here
    • Photo: NJ 305 ENJ 305 EZ&S25 × 62 × 17available to order€8.12+€5.62
    • Photo: NJ 305 ENJ 305 EURB25 × 62 × 17available to order€9.95+€7.45
    • Series illustration (not a photo of this item): NJ305ENJ305ECT25 × 62 × 17available to orderon request
    • Series illustration (not a photo of this item): NJ 305NJ 305KG25 × 62 × 17available to orderon request
    • Series illustration (not a photo of this item): NJ305ET *5NJ305ET *5NSK25 × 62 × 17available to orderon request
    • Series illustration (not a photo of this item): NJ 305 ENJ 305 ENTE25 × 62 × 17available to orderon request
    • Series illustration (not a photo of this item): NJ 305 ECPNJ 305 ECPSKF25 × 62 × 17available to orderon request

    Under the price: the difference from the price of this bearing (€2.50).
    02

    Often bought with this

    seal 25×62, shaft snap ring Ø25, bore snap ring Ø62

    5 products
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39890 pcs
    • Seal 25×62JULU 025-62-7 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39available to order
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 25 × 62 × 17mm
    Cdynamic 46.5kN
    C0static 36.5kN
    mweight 0.29kg

    Cylindrical roller NJ bearing NJ 305.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 305 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet