+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.95 per piece.
NJ 207 · 35 × 72 × 17

Cylindrical roller · NJ 207

radial — highaxial — low, on one side
    Drawing of NJ 207: ⌀35 × ⌀72 × 17 mm⌀72⌀3517NJ 207
    Fig. 1: NJ 207, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 207

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ 207

    €2.36per piece incl. VAT
    In stock: 300 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    10 exact, 25 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    17 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    56 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    48 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    01

    Equivalents

    the same size 35 × 72 × 17 from other brands

    37 products
    Series illustration (not a photo of this item): NJ 207
    You are viewingCT NJ 207
    €2.36baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NJ 207NJ 207This bearingCT35 × 72 × 17300 pcs€2.36you are here
    • Photo: NJ 207 ENJ 207 EZ&S35 × 72 × 17available to order€8.55+€6.19
    • Photo: NJ 207NJ 207FKL35 × 72 × 17available to order€33.18+€30.82
    • Photo: NJ 207 ECPNJ 207 ECPSKF35 × 72 × 17available to order€34.67+€32.31
    • Series illustration (not a photo of this item): NJ 207 E M1NJ 207 E M1FAG35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): NJ 207 ENJ 207 EKG35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): NJ 207 ENJ 207 Eno brand35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): NJ207ET *5NJ207ET *5NSK35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): NJ 207 ENJ 207 ENTE35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): NJ 207 ECPNJ 207 ECPUTL35 × 72 × 17out of stockon request

    Under the price: the difference from the price of this bearing (€2.36).
    02

    Often bought with this

    seal 35×72, shaft snap ring Ø35, bore snap ring Ø72

    6 products
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.502,454 pcs
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 17mm
    Cdynamic 56kN
    C0static 48kN

    Cylindrical roller NJ bearing NJ 207.

    C, C₀: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 207 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet