+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.70 per piece.
NJ 206 · 30 × 62 × 16

Cylindrical roller · NJ 206

radial — highaxial — low, on one side
    Drawing of NJ 206: ⌀30 × ⌀62 × 16 mm⌀62⌀3016NJ 206
    Fig. 1: NJ 206, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 206

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT NJ 206

    €2.06per piece incl. VAT
    In stock: 204 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    8 exact, 25 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    16 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    44 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    36.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.24 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 30 × 62 × 16 from other brands

    36 products
    Series illustration (not a photo of this item): NJ 206
    You are viewingCT NJ 206
    €2.06baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NJ 206NJ 206This bearingCT30 × 62 × 16204 pcs€2.06you are here
    • Photo: NJ 206 ENJ 206 EZ&S30 × 62 × 16available to order€7.68+€5.62
    • Photo: NJ 206 ECPNJ 206 ECPSKF30 × 62 × 16available to order€30.99+€28.93
    • Series illustration (not a photo of this item): NJ206-E-XL-TVP2NJ206-E-XL-TVP2FAG30 × 62 × 16available to orderon request
    • Series illustration (not a photo of this item): NJ 206NJ 206KG30 × 62 × 16available to orderon request
    • Series illustration (not a photo of this item): NJ206NJ206no brand30 × 62 × 16available to orderon request
    • Series illustration (not a photo of this item): NJ206ET *5NJ206ET *5NSK30 × 62 × 16available to orderon request
    • Series illustration (not a photo of this item): NJ 206 ENJ 206 ENTE30 × 62 × 16available to orderon request

    Under the price: the difference from the price of this bearing (€2.06).
    02

    Often bought with this

    seal 30×62, shaft snap ring Ø30, bore snap ring Ø62

    5 products
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing
      €0.401,764 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 30 × 62 × 16mm
    Cdynamic 44kN
    C0static 36.5kN
    mweight 0.24kg

    Cylindrical roller NJ bearing NJ 206.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 206 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet