+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
N316 · 80 × 170 × 39

Cylindrical roller · N316

radial — high
    Drawing of N316: ⌀80 × ⌀170 × 39 mm⌀170⌀8039N316
    Fig. 1: N316, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of N316

    Load: radial high; no axial loadCylindrical roller N

    Bearing CT N316

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    6 exact, 24 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    39 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    300 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    290 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    3.9 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 170 × 39 from other brands

    32 products
    Series illustration (not a photo of this item): N316
    You are viewingCT N316

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): N316N316This bearingCT80 × 170 × 39available to orderon requestyou are here
    • Series illustration (not a photo of this item): N316MN316MDYZV80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): N 316 E TVP2N 316 E TVP2FAG80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): N316-E-XL-M1N316-E-XL-M1FAG80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): N316N316NTE80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): N 316 ECMN 316 ECMSKF80 × 170 × 39available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 170 × 39mm
    Cdynamic 300kN
    C0static 290kN
    mweight 3.9kg

    Cylindrical roller N bearing N316.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 316 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet