+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
N 322 · 110 × 240 × 50

Cylindrical roller · N 322

radial — high
    Drawing of N 322: ⌀110 × ⌀240 × 50 mm⌀240⌀11050N 322
    Fig. 1: N 322, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of N 322

    Load: radial high; no axial loadCylindrical roller N

    Bearing CT N 322

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    7 exact, 29 approximate
    d
    110 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    240 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    50 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    352 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 110 × 240 × 50 from other brands

    36 products
    Series illustration (not a photo of this item): N 322
    You are viewingCT N 322

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): N 322N 322This bearingCT110 × 240 × 50available to orderon requestyou are here
    • Series illustration (not a photo of this item): N 322 MN 322 MCT110 × 240 × 50available to orderon request
    • Series illustration (not a photo of this item): N 322 E-XL-M1N 322 E-XL-M1FAG110 × 240 × 50available to orderon request
    • Series illustration (not a photo of this item): N 322 FYMN 322 FYMKoyo110 × 240 × 50available to orderon request
    • Series illustration (not a photo of this item): N 322 WN 322 WNSK110 × 240 × 50available to orderon request
    • Series illustration (not a photo of this item): N322 ECMN322 ECMSKF110 × 240 × 50available to orderon request
    • Series illustration (not a photo of this item): N322 MN322 MURB110 × 240 × 50available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 110 × 240 × 50mm
    Cdynamic 352kN

    Cylindrical roller N bearing N 322.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 322 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet