+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €5.00 per piece.
NJ212 · 60 × 110 × 22

Cylindrical roller · NJ212

radial — highaxial — low, on one side
    Drawing of NJ212: ⌀60 × ⌀110 × 22 mm⌀110⌀6022NJ212
    Fig. 1: NJ212, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ212

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing CT Malaysia NJ212

    €6.05per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    12 exact, 23 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    22 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    108 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    102 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.82 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 110 × 22 from other brands

    36 products
    Series illustration (not a photo of this item): NJ212
    You are viewingCT NJ212
    €6.05baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NJ212NJ212This bearingCT60 × 110 × 22available to order€6.05you are here
    • Cross-section drawing to size: Cylindrical roller NJ, 60 × 110 × 22 mmNJ 212 single boxCT60 × 110 × 22288 pcs€5.45−€0.60
    • Series illustration (not a photo of this item): NJ 212 ENJ 212 EKG60 × 110 × 22available to order€8.99+€2.94
    • Photo: NJ 212 ETNNJ 212 ETNTMB60 × 110 × 22available to order€13.46+€7.41
    • Photo: NJ 212NJ 212Z&S60 × 110 × 22available to order€16.99+€10.94
    • Photo: NJ 212 ETVP2NJ 212 ETVP2FAG60 × 110 × 22available to order€69.68+€63.63
    • Series illustration (not a photo of this item): NJ 212NJ 212GPZ60 × 110 × 22out of stockon request
    • Series illustration (not a photo of this item): NJ 212NJ 212no brand60 × 110 × 22available to orderon request
    • Series illustration (not a photo of this item): NJ212ET *5NJ212ET *5NSK60 × 110 × 22available to orderon request
    • Series illustration (not a photo of this item): NJ212EW *5NJ212EW *5NSK60 × 110 × 22available to orderon request

    Under the price: the difference from the price of this bearing (€6.05).
    02

    Often bought with this

    seal 60×110, shaft snap ring Ø60, bore snap ring Ø110

    4 products
    • Seal 60×110JULU 060-110-12 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      €1.05480 pcs
    • Seal 60×110JULU 060-110-10 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    6 machines1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 1 assembly · 4 pcs per machine

      the machine has M; ours does not; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus check the version 1 assembly · 4 pcs per machine

      the machine has M; ours does not; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus check the version 1 assembly · 4 pcs per machine

      the machine has M; ours does not; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 922.3/​922.4 Belarus check the version 1 assembly · 4 pcs per machine

      the machine has M; ours does not; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    5. Belarus-80Kh/​80Kh.1/​100Kh Belarus check the version 1 assembly · 4 pcs per machine

      the machine has M; ours does not; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 60 × 110 × 22mm
    Cdynamic 108kN
    C0static 102kN
    mweight 0.82kg

    Cylindrical roller NJ bearing NJ212.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 212 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet