+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €4.79 per piece.
102308 · 40 × 90 × 23

Cylindrical roller · 102308 · simplified: rib design, not given in the designation

radial — highaxial depends on the ribs: NU and N take none, NJ one side, NUP both sides
    Drawing of 102308: ⌀40 × ⌀90 × 23 mm⌀90⌀4023102308
    Fig. 1: 102308, end view and section; internal parts simplified per ISO 8826-1; GOST number, dimensions from the GOST↔ISO table CX p.759. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 102308

    Load: radial high; no axial loadCylindrical roller

    Bearing CT Malaysia 102308

    €5.80per piece incl. VAT
    In stock: 35 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    0 exact, 37 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 40 × 90 × 23 from other brands

    40 products
    Cross-section drawing to size: Cylindrical roller, 40 × 90 × 23 mm
    You are viewingCT 102308
    €5.80baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU 308 ENU 308 EEKG40 × 90 × 2327 pcs€7.77+€1.97
    • Series illustration (not a photo of this item): N308J PQN308J PQJ, PQ: not decodedNTE40 × 90 × 2320 pcs€10.06+€4.26
    • Series illustration (not a photo of this item): NJ308J PQNJ308J PQJ, PQ: not decodedNTE40 × 90 × 2348 pcs€10.06+€4.26
    • Series illustration (not a photo of this item): NU308J PQNU308J PQJ, PQ: not decodedNTE40 × 90 × 2348 pcs€10.06+€4.26
    • Photo: NUP 308 ENUP 308 EEZ&S40 × 90 × 23available to order€14.54+€8.74
    • Photo: NUP 308 ENVNUP 308 ENVE, groove for a snap ring, V: not decodedZ&S40 × 90 × 23available to order€14.54+€8.74
    • Photo: NU 308 ENU 308 EEURB40 × 90 × 23available to order€15.67+€9.87
    • Photo: NJ 308 ENJ 308 EEZ&S40 × 90 × 23available to order€17.38+€11.58
    • Photo: NU 308NU 308different series: NU308FLT40 × 90 × 23available to order€21.56+€15.76
    • Photo: NU 308NU 308different series: NU308ZKL40 × 90 × 23available to order€21.56+€15.76

    Under the price: the difference from the price of this bearing (€5.80).
    02

    Often bought with this

    seal 40×90, shaft snap ring Ø40, bore snap ring Ø90

    6 products
    • Seal 40×90JULU 040-90-10 TCWhy it fits: Oil seal 40×90: shaft 40 and housing bore 90, the same as the bearing
      €0.73400 pcs
    • Seal 40×90JULU 040-90-12 TCWhy it fits: Oil seal 40×90: shaft 40 and housing bore 90, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 40 × 90 × 23mm

    Cylindrical roller bearing 102308.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet