+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
97514 · 70 × 125 × 74.625

Tapered roller · 97514

at an angle — high, on one side
    Drawing of 97514: ⌀70 × ⌀125 × 74.625 mm⌀125⌀70T 74.625C 62α97514
    Fig. 1: 97514, end view and section; internal parts simplified per ISO 8826-1; GOST number, dimensions from the GOST↔ISO table CX p.795. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 97514

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing CT 97514

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    d
    70 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    125 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    T
    74.625 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    Cup width C
    62 mm
    Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
    01

    Often bought with this

    seal 70×125, shaft snap ring Ø70, bore snap ring Ø125

    3 products
    • Seal 70×125JULU 070-125-10 TCWhy it fits: Oil seal 70×125: shaft 70 and housing bore 125, the same as the bearing
      €0.8782 pcs
    • Shaft snap ring Ø70CT SEG 70 Z by1000Why it fits: DIN 471 snap ring for a 70 shaft: holds the inner ring on the shaft
      €209.55out of stock
    • Bore snap ring Ø125CT SEG 125 W by 100Why it fits: DIN 472 snap ring for a 125 bore: holds the outer ring in the housing
      €67.941 pcs
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 70 × 125 × 74.625mm

    Tapered roller bearing 97514.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet