+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.86 per piece.
7804 · 19.05 × 45.25 × 15.494

Tapered roller · 7804

at an angle — high, on one side
    Drawing of 7804: ⌀19.05 × ⌀45.25 × 15.494 mm⌀45.25⌀19.05T 15.494α7804
    Fig. 1: 7804, end view and section; internal parts simplified per ISO 8826-1; GOST number = ISO LM11949/10, dimensions from the GOST↔ISO table CX p.789. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7804

    Combined load at an angle (tapered, high), axial on one sideTapered roller

    Bearing CT Malaysia 7804

    €1.04per piece incl. VAT
    In stock: 136 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    3 exact, 0 approximate
    d
    19.05 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    45.25 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    T
    15.494 mm
    Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
    C
    28 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 19.05 × 45.25 × 15.494 from other brands

    9 products
    Cross-section drawing to size: Tapered roller, 19.05 × 45.25 × T 15.494 mm
    You are viewingCT 7804
    €1.04baseline for the price comparison

    Everything the number specifies matches: series 78, 19.05 × 45.25 mm, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Cross-section drawing to size: Tapered roller, 19.05 × 45.25 × T 15.494 mm7804This bearingCT19.05 × 45.25 × ?136 pcs€1.04you are here
    • Type diagram, no dimensions: bearing7804KG19.05 × 45.25 × ?53 pcs€1.55+€0.51
    • Type diagram, no dimensions: bearing7804NTE19.05 × 45.25 × ?available to orderon request

    Under the price: the difference from the price of this bearing (€1.04).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Tsize 19.05 × 45.25 × 15.494mm
    Cdynamic 28kN

    Tapered roller bearing 7804.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet