+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
7322ACM · 110 × 240 × 50

Angular contact ball · 7322ACM

at an angle — medium, on one side
    Drawing of 7322ACM: ⌀110 × ⌀240 × 50 mm⌀240⌀110507322ACM
    Fig. 1: 7322ACM, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7322ACM

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing CT 7322ACM

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 8 approximate
    d
    110 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    240 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    50 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    C
    232 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 110 × 240 × 50 from other brands

    10 products
    Series illustration (not a photo of this item): 7322ACM
    You are viewingCT 7322ACM

    Everything the number specifies matches: series 73, 110 × 240 × 50 mm, open, no protection, AC, special design. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 7322ACM7322ACMThis bearingCT110 × 240 × 50available to orderon requestyou are here
    • Series illustration (not a photo of this item): 7322ACM7322ACMDYZV110 × 240 × 50available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 240d 110B 50
    d×D×Bsize 110 × 240 × 50mm
    Cdynamic 232kN

    Angular contact ball bearing 7322 AC.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet