+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €8.39 per piece.
7310ACM · 50 × 110 × 27

Angular contact ball · 7310ACM

at an angle — medium, on one side
    Drawing of 7310ACM: ⌀50 × ⌀110 × 27 mm⌀110⌀50277310ACM
    Fig. 1: 7310ACM, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7310ACM

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing CT 7310ACM

    €10.15per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 9 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    27 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    C
    70.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 50 × 110 × 27 from other brands

    10 products
    Series illustration (not a photo of this item): 7310ACM
    You are viewingCT 7310ACM
    €10.15baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 7310 B7310 BBCT50 × 110 × 27591 pcs€5.58−€4.57
    • Series illustration (not a photo of this item): 7310 B-XL-TVP-UO7310 B-XL-TVP-UOB, TVP, XL, UO: not decodedFAG50 × 110 × ?available to orderon request
    • Series illustration (not a photo of this item): 7310 B7310 BBFLT50 × 110 × 27out of stockon request
    • Series illustration (not a photo of this item): 7310 B7310 BBKG50 × 110 × 27available to orderon request
    • Series illustration (not a photo of this item): 7310 BECBJ7310 BECBJpressed steel cage, BE, CBSKF50 × 110 × 27available to orderon request
    • Series illustration (not a photo of this item): 7310 BECBM7310 BECBMdifferent cage, BE, CBSKF50 × 110 × 27available to orderon request
    • Series illustration (not a photo of this item): 7310 BECBP7310 BECBPBE, CB, PSKF50 × 110 × 27available to orderon request
    • Series illustration (not a photo of this item): 7310 BEGAP7310 BEGAPBE, GA, PSKF50 × 110 × 27available to orderon request
    • Series illustration (not a photo of this item): 7310 BE-2RZP7310 BE-2RZPnon-contact seals on both sides, BE, PSKF50 × 110 × 27available to orderon request

    Under the price: the difference from the price of this bearing (€10.15).
    02

    Often bought with this

    seal 50×110, shaft snap ring Ø50, bore snap ring Ø110

    4 products
    • Seal 50×110JULU 050-110-10 TCWhy it fits: Oil seal 50×110: shaft 50 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 110d 50B 27
    d×D×Bsize 50 × 110 × 27mm
    Cdynamic 70.1kN

    Angular contact ball bearing 7310 AC.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet