+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.49 per piece.
7211 · 55 × 100 × 21

Angular contact ball · 7211 · simplified: contact angle, not given in the designation

radial — mediumaxial — medium, on one side
    Drawing of 7211: ⌀55 × ⌀100 × 21 mm⌀100⌀55217211
    Fig. 1: 7211, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7211

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing CT 7211

    €3.01per piece incl. VAT
    In stock: 147 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 11 approximate
    d
    55 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    21 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    C
    48.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 55 × 100 × 21 from other brands

    15 products
    Series illustration (not a photo of this item): 7211
    You are viewingCT 7211
    €3.01baseline for the price comparison

    Everything the number specifies matches: series 72, 55 × 100 × 21 mm, open, no protection, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 72117211This bearingCT55 × 100 × 21147 pcs€3.01you are here
    • Photo: 72117211ZKL55 × 100 × 21available to order€41.48+€38.47

    Under the price: the difference from the price of this bearing (€3.01).
    02

    Often bought with this

    seal 55×100, shaft snap ring Ø55, bore snap ring Ø100

    4 products
    • Seal 55×100JULU 055-100-10 TCWhy it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing
      €0.98630 pcs
    • Seal 55×100SUPTEX 55x100x13Why it fits: Oil seal 55×100: shaft 55 and housing bore 100, the same as the bearing
      €4.57available to order
    • Shaft snap ring Ø55CT SEG 55 Z by1000Why it fits: DIN 471 snap ring for a 55 shaft: holds the inner ring on the shaft
      €125.77available to order
    • Bore snap ring Ø100CT SEG 100 W by 100Why it fits: DIN 472 snap ring for a 100 bore: holds the outer ring in the housing
      €28.8214 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 100d 55B 21
    d×D×Bsize 55 × 100 × 21mm
    Cdynamic 48.8kN

    Angular contact ball bearing 7211.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet