+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.84 per piece.
7202AC · 15 × 35 × 11

Angular contact ball · 7202AC

at an angle — medium, on one side
    Drawing of 7202AC: ⌀15 × ⌀35 × 11 mm⌀35⌀15117202AC
    Fig. 1: 7202AC, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 7202AC

    Combined load at an angle (angular contact), axial on one sideAngular contact ball

    Bearing CT 7202AC

    €1.02per piece incl. VAT
    In stock: 14 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 8 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    35 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    11 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    C
    8.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 15 × 35 × 11 from other brands

    13 products
    Series illustration (not a photo of this item): 7202AC
    You are viewingCT 7202AC
    €1.02baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 7202 B7202 BBCT15 × 35 × 1191 pcs€1.02same price
    • Series illustration (not a photo of this item): 7202 BEP7202 BEPBE, PCT15 × 35 × 1110 pcs€1.16+€0.14
    • Series illustration (not a photo of this item): 7202 BTNG7202 BTNGB, TNGCT15 × 35 × 11220 pcs€1.16+€0.14
    • Photo: 7202 BEP7202 BEPBE, PSKF15 × 35 × 1120 pcs€13.64+€12.62
    • Photo: 7202 BTVP7202 BTVPB, TVPFAG15 × 35 × 11available to order€13.29+€12.27
    • Series illustration (not a photo of this item): 7202 B-XL-TVP-UO7202 B-XL-TVP-UOB, TVP, XL, UO: not decodedFAG15 × 35 × ?available to orderon request
    • Series illustration (not a photo of this item): B7202-C-T-P4S-ULB7202-C-T-P4S-ULprecision class P4S, C, T, UL, B: not decodedFAG15 × 35 × ?available to orderon request
    • Series illustration (not a photo of this item): 7202 CYU/GLP47202 CYU/GLP4CYU, GLP4: not decodedNACHI15 × 35 × ?available to orderon request

    Under the price: the difference from the price of this bearing (€1.02).
    02

    Often bought with this

    seal 15×35, shaft snap ring Ø15, bore snap ring Ø35

    5 products
    • Seal 15×35JULU 015-35-7 TCWhy it fits: Oil seal 15×35: shaft 15 and housing bore 35, the same as the bearing
      €0.211,290 pcs
    • Seal 15×35JULU 015-35-10 TCWhy it fits: Oil seal 15×35: shaft 15 and housing bore 35, the same as the bearing
      €0.24available to order
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø35CT SEG 35 W by 1000Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      €40.62available to order
    • Bore snap ring Ø35SEG 35 W (100 pcs)Why it fits: DIN 472 snap ring for a 35 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 35d 15B 11
    d×D×Bsize 15 × 35 × 11mm
    Cdynamic 8.1kN

    Angular contact ball bearing 7202 AC.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet