+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6912 2RS · 60 × 85 × 13

Deep groove ball · 6912 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6912 2RS: ⌀60 × ⌀85 × 13 mm6912 2RS2RS
    Fig. 1: 6912 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6912 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6912 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    4 exact, 6 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    85 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    13 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 60 × 85 × 13 from other brands

    11 products
    Series illustration (not a photo of this item): 6912 2RS
    You are viewingCT 6912 2RS

    Everything the number specifies matches: series 69, 60 × 85 × 13 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6912 2RS6912 2RSThis bearingCT60 × 85 × 13available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6912 / 61912 2RS6912 / 61912 2RSCT60 × 85 × 13180 pcs€2.89
    • Series illustration (not a photo of this item): 6912 2RS6912 2RSno brand60 × 85 × 13available to orderon request
    • Series illustration (not a photo of this item): 61912-2RS161912-2RS1SKF60 × 85 × 13available to orderon request
    02

    Often bought with this

    shaft snap ring Ø60, bore snap ring Ø85, seal 60×85

    4 products
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø85CT SEG 85 W by 100Why it fits: DIN 472 snap ring for a 85 bore: holds the outer ring in the housing
      €22.57out of stock
    • Seal 60×85JULU 060-85-10 TCWhy it fits: Oil seal 60×85: shaft 60 and housing bore 85, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.57889 pcs
    • Seal 60×85JULU 060-85-8 TCWhy it fits: Oil seal 60×85: shaft 60 and housing bore 85, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.61240 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 85d 60B 13
    d×D×Bsize 60 × 85 × 13mm

    Deep groove ball bearing 6912-2RS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet