+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.45 per piece.
6906 / 61906 ZZ · 30 × 47 × 9

Deep groove ball · 6906 / 61906 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6906 / 61906 ZZ: ⌀30 × ⌀47 × 9 mm6906 / 61906 ZZZZ
    Fig. 1: 6906 / 61906 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6906 / 61906 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6906 / 61906 ZZ

    €0.54per piece incl. VAT
    In stock: 530 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 15 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    9 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 30 × 47 × 9 from other brands

    20 products
    Series illustration (not a photo of this item): 6906 / 61906 ZZ
    You are viewingCT 6906 / 61906 ZZ
    €0.54baseline for the price comparison

    Everything the number specifies matches: series 619, 30 × 47 × 9 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6906 / 61906 ZZ6906 / 61906 ZZThis bearingCT30 × 47 × 9530 pcs€0.54you are here
    • Series illustration (not a photo of this item): 6906 / 61906 ZZ6906 / 61906 ZZno brand30 × 47 × 9available to orderon request
    • Series illustration (not a photo of this item): 6906 ZZ6906 ZZno brand30 × 47 × 9available to orderon request
    • Series illustration (not a photo of this item): 6906 ZZ6906 ZZCT30 × 47 × 9available to orderon request
    • Series illustration (not a photo of this item): 6906 ZZ6906 ZZKG30 × 47 × 9available to orderon request

    Under the price: the difference from the price of this bearing (€0.54).
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø47, seal 30×47

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 30×47JULU 030-47-8 TCWhy it fits: Oil seal 30×47: shaft 30 and housing bore 47, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.25100 pcs
    • Seal 30×47JULU 030-47-10 TCWhy it fits: Oil seal 30×47: shaft 30 and housing bore 47, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.29760 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 47d 30B 9
    d×D×Bsize 30 × 47 × 9mm

    Deep groove ball bearing 61906-ZZ, design ZZ: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet