+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.30 per piece.
6804 ZZ · 20 × 32 × 7

Deep groove ball · 6804 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6804 ZZ: ⌀20 × ⌀32 × 7 mm6804 ZZZZ
    Fig. 1: 6804 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6804 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6804 ZZ

    €0.36per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 13 approximate
    d
    20 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    7 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 20 × 32 × 7 from other brands

    18 products
    Series illustration (not a photo of this item): 6804 ZZ
    You are viewingCT 6804 ZZ
    €0.36baseline for the price comparison

    Everything the number specifies matches: series 68, 20 × 32 × 7 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6804 ZZ6804 ZZThis bearingCT20 × 32 × 7available to order€0.36you are here
    • Series illustration (not a photo of this item): 6804 / 61804 ZZ6804 / 61804 ZZCT20 × 32 × 716,000 pcs€0.36same price
    • Photo: 61804 ZZ61804 ZZZ&S20 × 32 × 7available to order€7.15+€6.79
    • Series illustration (not a photo of this item): 61804 ZZ61804 ZZCT20 × 32 × 7available to orderon request
    • Series illustration (not a photo of this item): 6804 ZZ6804 ZZKG20 × 32 × 7available to orderon request

    Under the price: the difference from the price of this bearing (€0.36).
    02

    Often bought with this

    shaft snap ring Ø20, bore snap ring Ø32, seal 20×32

    5 products
    • Shaft snap ring Ø20CT SEG 20 Z by 1000Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      €22.57available to order
    • Shaft snap ring Ø20SEG 20 Z (100 pcs)Why it fits: DIN 471 snap ring for a 20 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    • Seal 20×32JULU 020-32-7 TCWhy it fits: Oil seal 20×32: shaft 20 and housing bore 32, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.211,122 pcs
    • Seal 20×32JULU 020-32-5 TCWhy it fits: Oil seal 20×32: shaft 20 and housing bore 32, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.18available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 20B 7
    d×D×Bsize 20 × 32 × 7mm

    Deep groove ball bearing 6804-ZZ, design ZZ: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 6804 ZZ C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet