+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.32 per piece.
6701 2RS · 12 × 18 × 4

Deep groove ball · 6701 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6701 2RS: ⌀12 × ⌀18 × 4 mm6701 2RS2RS
    Fig. 1: 6701 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6701 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6701 2RS

    €0.39per piece incl. VAT
    In stock: 449 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    d
    12 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    18 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    4 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Often bought with this

    shaft snap ring Ø12, bore snap ring Ø18

    3 products
    • Shaft snap ring Ø12CT SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      €0.61available to order
    • Shaft snap ring Ø12SEG 12 Z (100 pcs)Why it fits: DIN 471 snap ring for a 12 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø18CT SEG 18 W by 1000Why it fits: DIN 472 snap ring for a 18 bore: holds the outer ring in the housing
      €10.38available to order
    02

    Details

    what this bearing is, questions

    About the bearing

    D 18d 12B 4
    d×D×Bsize 12 × 18 × 4mm

    Deep groove ball bearing 6701-2RS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet