+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €11.19 per piece.
6412 · 60 × 150 × 35

Deep groove ball · 6412

radial — mediumaxial — low, on both sides
    Drawing of 6412: ⌀60 × ⌀150 × 35 mm6412
    Fig. 1: 6412, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6412

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6412

    €13.54per piece incl. VAT
    In stock: 29 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    3 exact, 4 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    35 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    108 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    69.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    2.75 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 150 × 35 from other brands

    7 products
    Series illustration (not a photo of this item): 6412
    You are viewingCT 6412
    €13.54baseline for the price comparison

    Everything the number specifies matches: series 64, 60 × 150 × 35 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 64126412This bearingCT60 × 150 × 3529 pcs€13.54you are here
    • Series illustration (not a photo of this item): 64126412DYZV60 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): 64126412KG60 × 150 × 35available to orderon request

    Under the price: the difference from the price of this bearing (€13.54).
    02

    Often bought with this

    shaft snap ring Ø60, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 150d 60B 35
    d×D×Bsize 60 × 150 × 35mm
    Cdynamic 108kN
    C0static 69.5kN
    mweight 2.75kg

    Deep groove ball bearing 6412. Under GOST the same bearing is designated 412.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 412?

    It is the same bearing under GOST 3189-89: 412 corresponds to the ISO base 6412. Size 60 × 150 × 35 mm, a full equivalent of 6412.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet