+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6408 2RS C3 · 40 × 110 × 27

Deep groove ball · 6408 2RS C3

radial — mediumaxial — low, on both sides
    Drawing of 6408 2RS C3: ⌀40 × ⌀110 × 27 mm6408 2RS C32RS
    Fig. 1: 6408 2RS C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6408 2RS C3

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6408 2RS C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 10 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    27 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    C3
    C
    63.7 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    36.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.25 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 110 × 27 from other brands

    11 products
    Drawing: 6408 2RS C3
    You are viewingCT 6408 2RS C3

    Same size, different design: the difference is written in the row.

    • Cross-section drawing to size: Deep groove ball, 40 × 110 × 27 mm6408 Nopen, no protection, normal clearance, groove for a snap ringCT40 × 110 × 2740 pcs€4.79
    • Photo: 6408 C36408 C3open, no protectionFAG40 × 110 × 27available to order€57.60
    • Series illustration (not a photo of this item): 64086408open, no protection, normal clearanceCT40 × 110 × 27available to orderon request
    • Series illustration (not a photo of this item): 64086408open, no protection, normal clearanceKG40 × 110 × 27available to orderon request
    • Cross-section drawing to size: Deep groove ball, 40 × 110 × 27 mm6408 Nopen, no protection, normal clearance, groove for a snap ringKG40 × 110 × 27available to orderon request
    • Series illustration (not a photo of this item): 6408 C36408 C3open, no protectionKoyo40 × 110 × 27available to orderon request
    • Series illustration (not a photo of this item): 6408/C36408/C3open, no protectionSKF40 × 110 × 27available to orderon request
    • Cross-section drawing to size: Deep groove ball, 40 × 110 × 27 mm6408 Nopen, no protection, normal clearance, groove for a snap ringSKF40 × 110 × 27available to orderon request
    • Drawing: 6408 2RS6408 2RSnormal clearanceKBS40 × 110 × 27available to orderon request
    • Series illustration (not a photo of this item): 6408 ZZ6408 ZZmetal shields on both sides, normal clearanceNSK40 × 110 × 27available to orderon request
    02

    Often bought with this

    shaft snap ring Ø40, bore snap ring Ø110

    3 products
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    6 machines2 makesby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    3. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    4. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN)

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. KhTZ-16131, KhTZ-16331 KhTZ same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open; ours has clearance C3; the machine takes normal (CN); the machine has snap ring groove (N); ours does not

      manufacturer’s catalogue: Tractors KhTZ-16131, KhTZ-16331. Operator’s manual 161.00.000 RE

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 110d 40B 27
    d×D×Bsize 40 × 110 × 27mm
    Cdynamic 63.7kN
    C0static 36.5kN
    mweight 1.25kg

    Deep groove ball bearing 6408-2RS C3, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet