+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6322 2RS · 110 × 240 × 50

Deep groove ball · 6322 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6322 2RS: ⌀110 × ⌀240 × 50 mm6322 2RS2RS
    Fig. 1: 6322 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6322 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6322 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 14 approximate
    d
    110 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    240 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    50 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    203 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    180 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    9.55 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 110 × 240 × 50 from other brands

    18 products
    Series illustration (not a photo of this item): 6322 2RS
    You are viewingCT 6322 2RS

    Everything the number specifies matches: series 63, 110 × 240 × 50 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6322 2RS6322 2RSThis bearingCT110 × 240 × 50available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6322 2RSR6322 2RSRFAG110 × 240 × 50available to orderon request
    • Series illustration (not a photo of this item): 6322 2RS6322 2RSKBS110 × 240 × 50available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 240d 110B 50
    d×D×Bsize 110 × 240 × 50mm
    Cdynamic 203kN
    C0static 180kN
    mweight 9.55kg

    Deep groove ball bearing 6322-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180322.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180322?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0322 corresponds to the ISO base 6322. Size 110 × 240 × 50 mm, a full equivalent of 6322-2RS.

    Will 6322 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet