+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
63008 2RS · 40 × 68 × 21

Deep groove ball · 63008 2RS

radial — mediumaxial — low, on both sides
    Drawing of 63008 2RS: ⌀40 × ⌀68 × 21 mm63008 2RS2RS
    Fig. 1: 63008 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 63008 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 63008 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 0 approximate
    d
    40 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    68 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    21 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    16.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    11.6 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.26 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 40 × 68 × 21 from other brands

    2 products
    Series illustration (not a photo of this item): 63008 2RS
    You are viewingCT 63008 2RS

    Everything the number specifies matches: series 630, 40 × 68 × 21 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 63008 2RS63008 2RSThis bearingCT40 × 68 × 21available to orderon requestyou are here
    • Series illustration (not a photo of this item): 63008-2RS163008-2RS1SKF40 × 68 × 21available to orderon request
    02

    Often bought with this

    shaft snap ring Ø40, bore snap ring Ø68, seal 40×68

    5 products
    • Shaft snap ring Ø40CT SEG 40 Z by 1000Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      €54.16available to order
    • Shaft snap ring Ø40SEG 40 Z (100 pcs)Why it fits: DIN 471 snap ring for a 40 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø68CT SEG 68 W by 100Why it fits: DIN 472 snap ring for a 68 bore: holds the outer ring in the housing
      €16.07available to order
    • Seal 40×68JULU 040-68-10 TCWhy it fits: Oil seal 40×68: shaft 40 and housing bore 68, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.443,418 pcs
    • Seal 40×68JULU 040-68-7 TCWhy it fits: Oil seal 40×68: shaft 40 and housing bore 68, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.44210 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 68d 40B 21
    d×D×Bsize 40 × 68 × 21mm
    Cdynamic 16.8kN
    C0static 11.6kN
    mweight 0.26kg

    Deep groove ball bearing 63008-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet