+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.20 per piece.
624 2RS · 4 × 13 × 5

Deep groove ball · 624 2RS

radial — mediumaxial — low, on both sides
    Drawing of 624 2RS: ⌀4 × ⌀13 × 5 mm624 2RS2RS
    Fig. 1: 624 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 624 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 624 2RS

    €0.24per piece incl. VAT
    In stock: 5 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    3 exact, 0 approximate
    d
    4 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    13 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    5 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    0.936 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    0.29 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.0031 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 4 × 13 × 5 from other brands

    3 products
    Series illustration (not a photo of this item): 624 2RS
    You are viewingCT 624 2RS
    €0.24baseline for the price comparison

    Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 624 2RS624 2RSThis bearingCT4 × 13 × 55 pcs€0.24you are here
    • Photo: 624 2RS624 2RSWBW4 × 13 × 5available to order€0.65+€0.41
    • Series illustration (not a photo of this item): 624 2RS624 2RSKG4 × 13 × 5available to orderon request

    Under the price: the difference from the price of this bearing (€0.24).
    02

    Often bought with this

    shaft snap ring Ø4, bore snap ring Ø13

    2 products
    • Shaft snap ring Ø4CT SEG 4 Z by1000Why it fits: DIN 471 snap ring for a 4 shaft: holds the inner ring on the shaft
      €5.37available to order
    • Bore snap ring Ø13CT SEG 13 W by 1000Why it fits: DIN 472 snap ring for a 13 bore: holds the outer ring in the housing
      €7.2211 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 13d 4B 5
    d×D×Bsize 4 × 13 × 5mm
    Cdynamic 0.936kN
    C0static 0.29kN
    mweight 0.0031kg

    Deep groove ball bearing 624-2RS, design 2RS: contact seals on both sides.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet