+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €6.60 per piece.
6217 2RS · 85 × 150 × 28

Deep groove ball · 6217 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6217 2RS: ⌀85 × ⌀150 × 28 mm6217 2RS2RS
    Fig. 1: 6217 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6217 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6217 2RS

    €7.99per piece incl. VAT
    In stock: 383 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    6 exact, 24 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    28 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    87.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    64 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.8 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 85 × 150 × 28 from other brands

    32 products
    Series illustration (not a photo of this item): 6217 2RS
    You are viewingCT 6217 2RS
    €7.99baseline for the price comparison

    Everything the number specifies matches: series 62, 85 × 150 × 28 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6217 2RS6217 2RSThis bearingCT85 × 150 × 28383 pcs€7.99you are here
    • Series illustration (not a photo of this item): 6217 2RS6217 2RSNTE85 × 150 × 286 pcs€13.76+€5.77
    • Photo: 6217 2RS6217 2RSZ&S85 × 150 × 28available to order€19.92+€11.93
    • Series illustration (not a photo of this item): 6217 2RS6217 2RSno brand85 × 150 × 28available to orderon request
    • Series illustration (not a photo of this item): 6217 2RS6217 2RSF&D85 × 150 × 28out of stockon request
    • Series illustration (not a photo of this item): 6217 2RS6217 2RSKG85 × 150 × 28available to orderon request

    Under the price: the difference from the price of this bearing (€7.99).
    02

    Often bought with this

    bore snap ring Ø150

    1 product
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    8 machines1 makeby parts catalogues

    1. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus 2022/​2022V (2022.3/​2022V.3) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 2022/​2022V. 2022-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    3. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    4. Belarus 900/​920/​950/​952 (900.2/​900.3/​920.2/​920.3/​950.2/​950.3/​952.2/​952.3) Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 900/​920/​950/​952. 900-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 922.3/​922.4 Belarus same geometry 1 assembly · 4 pcs per machine

      the machine has A; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (180217) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 150d 85B 28
    d×D×Bsize 85 × 150 × 28mm
    Cdynamic 87.1kN
    C0static 64kN
    mweight 1.8kg

    Deep groove ball bearing 6217-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180217.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180217?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0217 corresponds to the ISO base 6217. Size 85 × 150 × 28 mm, a full equivalent of 6217-2RS.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet