+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.24 per piece.
6212 2RS · 60 × 110 × 22

Deep groove ball · 6212 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6212 2RS: ⌀60 × ⌀110 × 22 mm6212 2RS2RS
    Fig. 1: 6212 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6212 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6212 2RS

    €2.71per piece incl. VAT
    In stock: 850 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    7 exact, 40 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    22 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    55.3 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    36 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.78 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 110 × 22 from other brands

    49 products
    Series illustration (not a photo of this item): 6212 2RS
    You are viewingCT 6212 2RS
    €2.71baseline for the price comparison

    Everything the number specifies matches: series 62, 60 × 110 × 22 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6212 2RS6212 2RSThis bearingCT60 × 110 × 22850 pcs€2.71you are here
    • Series illustration (not a photo of this item): 6212 2RS6212 2RSNTE60 × 110 × 22607 pcs€6.21+€3.50
    • Photo: 6212 2RS6212 2RSKLT60 × 110 × 22available to order€2.49−€0.22
    • Photo: 6212 2RS6212 2RSZ&S60 × 110 × 22available to order€7.94+€5.23
    • Photo: 6212-2RS16212-2RS1SKF60 × 110 × 22available to order€23.89+€21.18
    • Series illustration (not a photo of this item): 6212 2RS6212 2RSF&D60 × 110 × 22out of stockon request
    • Series illustration (not a photo of this item): 6212 2RS6212 2RSKG60 × 110 × 22available to orderon request

    Under the price: the difference from the price of this bearing (€2.71).
    02

    Often bought with this

    shaft snap ring Ø60, bore snap ring Ø110, seal 60×110

    4 products
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    • Seal 60×110JULU 060-110-12 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €1.05480 pcs
    • Seal 60×110JULU 060-110-10 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    7 machines2 makesby parts catalogues

    1. Belarus 2522DV/​2822DTs/​3022DV (2522.1/​2822.1/​3022.1) Belarus same geometry 5 assemblies · 6 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 2522DV/​2822DTs/​3022DV. 2822DTs-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    2. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 2 assemblies · 4 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    3. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 1 assembly · 2 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    4. KhTZ-2511, KhTZ-3510 KhTZ same geometry 1 assembly · 2 pcs per machine

      ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    5. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus same geometry 1 assembly · 1 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: seals on both sides (2RS); in the machine: open

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (180212) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 110d 60B 22
    d×D×Bsize 60 × 110 × 22mm
    Cdynamic 55.3kN
    C0static 36kN
    mweight 0.78kg

    Deep groove ball bearing 6212-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180212.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180212?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0212 corresponds to the ISO base 6212. Size 60 × 110 × 22 mm, a full equivalent of 6212-2RS.

    Will 6212 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet