+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.86 per piece.
6210 N · 50 × 90 × 20

Deep groove ball · 6210 N

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6210 N: ⌀50 × ⌀90 × 20 mm⌀90⌀50206210 N
    Fig. 1: 6210 N, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6210 N

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT Malaysia 6210 N

    €2.25per piece incl. VAT
    In stock: 224 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    4 exact, 73 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    90 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    20 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    37.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    23.2 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.46 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 90 × 20 from other brands

    77 products
    Series illustration (not a photo of this item): 6210 N
    You are viewingCT 6210 N
    €2.25baseline for the price comparison

    Everything the number specifies matches: series 62, 50 × 90 × 20 mm, open, no protection, N, normal clearance, special design. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6210 N6210 NThis bearingCT50 × 90 × 20224 pcs€2.25you are here
    • Photo: 6210 N6210 NZ&S50 × 90 × 20available to order€8.08+€5.83
    • Series illustration (not a photo of this item): 6210 N6210 Nno brand50 × 90 × 20available to orderon request
    • Series illustration (not a photo of this item): 6210 N6210 NKG50 × 90 × 20available to orderon request

    Under the price: the difference from the price of this bearing (€2.25).
    02

    Often bought with this

    seal 50×90, shaft snap ring Ø50, bore snap ring Ø90

    5 products
    • Seal 50×90JULU 050-90-10 TCWhy it fits: Oil seal 50×90: shaft 50 and housing bore 90, the same as the bearing
      €0.73280 pcs
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø90CT SEG 90 W by 100Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      €23.89available to order
    • Bore snap ring Ø90SEG 90 W by 1000Why it fits: DIN 472 snap ring for a 90 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    18 machines3 makesby parts catalogues

    1. Belarus-80Kh/​80Kh.1/​100Kh Belarus same geometry 8 assemblies · 11 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: open; in the machine: shield on one side; ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    2. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus same geometry 7 assemblies · 10 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: open; in the machine: shield on one side; ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    3. Belarus 922.3/​922.4 Belarus same geometry 6 assemblies · 8 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours: open; in the machine: shield on one side; ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS 922.3/​922.4. 922-0000010 KDS. Catalogue of parts and assembly units, 2013 (RUE MTZ)

    4. Belarus 1523/​1523V/​1523.3 Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS 1523/​1523V/​1523.3. 1523-0000010 KDS. Catalogue of assembly units and parts, 2013 (RUE MTZ)

    5. Belarus 821/​921 (821.2/​821.3/​921.2/​921.3) Belarus same geometry 4 assemblies · 5 pcs per machine

      the machine has A; ours does not; the machine has U; ours does not; the machine has Sh1; ours does not; ours has snap ring groove (N)

      manufacturer’s catalogue: BELARUS 821/​921. 921-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (210) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 90d 50B 20
    d×D×Bsize 50 × 90 × 20mm
    Cdynamic 37.1kN
    C0static 23.2kN
    mweight 0.46kg

    Deep groove ball bearing 6210. Under GOST the same bearing is designated 210.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 210?

    It is the same bearing under GOST 3189-89: 210 corresponds to the ISO base 6210. Size 50 × 90 × 20 mm, a full equivalent of 6210.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet