+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.71 per piece.
6205 · 25 × 52 × 15

Deep groove ball · 6205

radial — mediumaxial — low, on both sides
    Drawing of 6205: ⌀25 × ⌀52 × 15 mm6205
    Fig. 1: 6205, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6205

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6205

    €0.86per piece incl. VAT
    In stock: 50 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 78 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    52 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    15 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    14.8 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    7.8 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.13 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 25 × 52 × 15 from other brands

    83 products
    Series illustration (not a photo of this item): 6205
    You are viewingCT 6205
    €0.86baseline for the price comparison

    Everything the number specifies matches: series 62, 25 × 52 × 15 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 62056205This bearingCT25 × 52 × 1550 pcs€0.86you are here
    • Series illustration (not a photo of this item): 62056205NTE25 × 52 × 1590 pcs€0.93+€0.07
    • Series illustration (not a photo of this item): 62056205Koyo25 × 52 × 1565 pcs€3.58+€2.72
    • Photo: 62056205SKF25 × 52 × 15available to order€3.59+€2.73
    • Series illustration (not a photo of this item): 62056205KG25 × 52 × 15available to orderon request

    Under the price: the difference from the price of this bearing (€0.86).
    02

    Often bought with this

    seal 25×52, shaft snap ring Ø25, bore snap ring Ø52

    6 products
    • Seal 25×52JULU 025-52-10 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing
      €0.392,950 pcs
    • Seal 25×52JULU 025-52-7 TCWhy it fits: Oil seal 25×52: shaft 25 and housing bore 52, the same as the bearing
      €0.397,720 pcs
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø52CT SEG 52 W by 1000Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      €86.47available to order
    • Bore snap ring Ø52CT-RING SEG 52 W (100 pcs)Why it fits: DIN 472 snap ring for a 52 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    10 machines4 makesby parts catalogues

    1. KhTZ-2511, KhTZ-3510 KhTZ exactly this number 1 assembly · 1 pcs per machine

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    2. VBP 2160 (baler) Kuhn same geometry 5 assemblies · 14 pcs per machine

      ours: open; in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: kuhn_vbp-2160

    3. Maschio Tigre (disc harrow) Maschio Gaspardo same geometry 1 assembly

      ours: open; in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: maschio_tigre-2016

    4. Maschio U/​UL/​Cobra (rotary tiller) Maschio Gaspardo same geometry 1 assembly

      ours: open; in the machine: seals on both sides (2RS)

      manufacturer’s catalogue: maschio_u-ul-cobra-2006

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 3 assemblies · 4 pcs per machine

      the machine has S17; ours does not; ours: open; in the machine: seals on both sides (2RS); not decoded: mark “K1” in the machine catalogue

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by GOST (205) or ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 52d 25B 15
    d×D×Bsize 25 × 52 × 15mm
    Cdynamic 14.8kN
    C0static 7.8kN
    mweight 0.13kg

    Deep groove ball bearing 6205. Under GOST the same bearing is designated 205.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 205?

    It is the same bearing under GOST 3189-89: 205 corresponds to the ISO base 6205. Size 25 × 52 × 15 mm, a full equivalent of 6205.

    Will 6205 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet